Pattern #2, Boatneck Pullover
Photo on page 35, instructions begin on page 63.
Updated: 21Sept2014
Corrections are underlined.
Pat row 4 2 dc in ch-2 sp, *ch 4, 5 dc in next ch-3 sp; rep from *, end ch 4, 3 dc in t-ch sp. Ch 1, turn.
Shoulder and neck shaping
After right shoulder is complete:
With RS facing, skip center 8 (8, 10) shells. Join yarn in next ch-4 sp and cont pat over last 6 (7, 7) shells.
Complete to correspond to first shoulder, reversing shaping.
Schematic shoulder measurements should read 7½ (8¾, 8¾)“
Pattern #3, Mini Sheath Dress
Photo on page 36, instructions begin on page 64.
Updated: 08Sept2014
Correction is underlined.
Sleeve cap shaping
Row 2 Ch 3, sk 1 ch, dc in next dc, work as established to last 3 sts, dc2tog over next 2 dc, turn.
Pattern #7, Tank Dress
Photo on page 40, instructions begin on page 70.
Updated: 10Nov2014
Corrections are underlined.
Back, after row 4:
Rep rows 3 and 4 seven times more.
Work Dec rows 1 and 2 as written.
Rep rows 4 and 3 eight times more, then row 4 once more.
Rep dec row 1 (will be a RS row) and dec row 2 (will be a WS row).
Rep last 19 rows once more.
Pattern #11, Chanel-Inspired Jacket
Photo on page 44, instructions begin on page 74.
Updated: 31Oct2014
Corrections are underlined.
Finished Measurements
Upper arm 13¼ (14¾, 16½, 18, 19½)”/33.5 (37.5, 42, 45.5, 49.5)cm
Schematic measurements for sleeve cuff should read as follows:
11¼ (13, 14½, 16, 17½)”
Pattern #12, Lacy Jacket
Photo on page 45, instructions begin on page 75.
Updated: 15May2014
Correction is underlined.
MATERIALS
7 (8, 8, 9, 10) 1¾oz/50g skeins (each approx 292yds/267m)
Pattern #15, Granny Square Throw
Photo on pages 48 and 49, instructions begin on page 78.
Updated: 29May2014
Correction is underlined.
Hook size was omitted from Materials. Throw is worked with a size 7 (4.5mm) crochet hook.
Square #23
L, D, M, B, C, A, M
Pattern #21, Ballet-Neck Tee
Photo on page 55, instructions begin on page 84.
Updated: 19Jun2014
Corrections are underlined.
Row 26 Ch 3 (counts as 1 dc), [3 dc in next ch-3 sp, dc in next sc, 3 dc in next ch-3 sp, dc in next dc] 2 (3, 4, 5) times, 3 dc in next ch-3 sp, hdc in next sc, 3 hdc in next ch-3 sp, sc in next dc, 3 sc in next ch-3 sp, turn.
Pattern #22, Missoni-Inspired Shift Dress
Photo on page 56, instructions begin on page 86.
Updated: 09May2014
Corrections are underlined.
Finished Measurements
Bust 36 (40, 44)”/91.5 (101.5, 111.5)cm
Length 35 (36, 37)”/89 (91.5, 94)cm
Upper arm 10 ½ (13, 15 ½ )”/26.5 (33, 39.5)cm
Ripple Pattern #1
Rep row 1 for ripple pat #1.
Back
With A, ch 166 (184, 202).
Work set-up row of ripple pat #1—9 (10, 11) pat reps.
Armhole shaping
Last line: Work even in pat #3 until armhole measures 7 (8, 9)”/17.5 (20.5, 23)cm.
Shoulder and neck shaping
Replace next 3 rows as foll:
Next row 2 dc in first dc, [dc in next 3 dc, dc2tog, dc3tog, dc2tog, dc in next 3 dc, work (2 dc, ch 1, 2 dc) in next ch-1 sp] 1 (2, 3) times, dc in next 3 dc, dc2tog, dc3tog, dc in next st, sc in next st. Fasten off. Turn.
Next row Skip 2 sts, join next color in next st, work sc in same st and next st, dc2tog, dc in next 3 sts, work in pat to last 8 sts, dc2tog, dc3tog, dc in next st, sc in next 2 sts. Fasten off.
Work 2nd shoulder in reverse as foll:
Next row Count 1½ (2½ , 3½) reps in from shoulder edge and join next stripe color in the 2nd st before the center dc3tog should be worked, dc in next st, dc3tog, work pat to end. Fasten off. Turn.
Front
Work same as back until 6 rows less than back.
Neck and shoulder shaping
Replace first row as foll:
Next row 2 dc in first dc, [dc in next 3 dc, dc2tog, dc3tog, dc2tog, dc in next 3 dc, work (2 dc, ch 1, 2 dc) in next ch-1 sp] 1 (2, 3) times, dc in next 3 dc, dc2tog, dc3tog, dc2tog, dc in next 3 dc, sc in next ch-1sp. Fasten off. Turn.
Cont as written to:
Skip center 41 sts.
Sleeves
With A, ch 76 (94, 112).
Work set-up row of ripple pat #1—4 (5, 6) pat reps.
Cont in ripple pat #1 and stripe pat as foll:
Beg with row 1 and B, work 3 (4, 4) rows in pat #1.
Work dec row 1 same as back.
Cont in ripple pat #2 for 4 (5, 6) rows.
Work dec row 2 same as back.
Cont in ripple pat #3 to end of sleeve.
AT SAME TIME, work decs as foll:
Dec 2 sts each side (working dec sts into pat) every row 5 (10, 15) times, then dec 1 st each side every row 6 (3, 0) times—25 sts.
Last row Dc in first 2 dc, dc2tog, dc3tog, dc2tog, dc in next dc, sc in next 5 sts, work in pat over 10 sts. Fasten off.
Pattern #29, Double Ladder Wrap
Photo on page 61, instructions begin on page 91.
Updated: 28May2014
Corrections are underlined.
In Stitch Glossary
Return pass (not reverse)
Wrap
Ch 61.
Work tss forwards pass in 2nd ch from hook and in each ch across—60 sts.
Work return pass of tss.
Work tss forward and return pass in each st.
*Next sc row (non-Tunisian) Working into the vertical bars as before but do not leave loops on hook, work sc over first 7 sts, sl st in next 20 sts, sc in next 7 sts, sl st in next 20 sts, sc in last 7 sts. Turn.
Next dc row (non-Tunisian) Ch 1, work 1 dc in each of next 7 sc, ch 20, sk 20 sl sts, work 1 dc in each of next 7 sc, ch 20, sk 20 sl sts, work 1 dc in each of last 7 sc. Turn.
Tss Forward pass Leaving loops on hook, work tss into each dc and each ch. Work return pass of tss.
Work tss forward pass (working into vertical bars of previous row) and return pass.
Rep from * until piece measures 70″/177.5cm.
