Fall 2010

Pattern #1, Cabled Cardigan

Photo on pages 72, instructions begin on page 106
Updated: 17Oct2011

Corrections are underlined.

Cable Panel, pg 50
Rep rows 3-18 for cable panel.

Instructions, pg 106

HONEY COMB PATTERN
(multiple of 4 sts plus 2)

STITCH GLOSSARY
4-st RSC Slip 2 sts to cn and hold to back, k2, then k1, p1 from cn.
4-st LSC Slip 2 sts to cn and hold to front, k1, p1, then k2 from cn.

BACK
Cast on and work as directed until….
Beg chart pat as foll:
Row 1 (RS) Work 8 (11, 14, 17, 23, 26, 29) sts in rev St st, work 34 sts of cable pat, work 0 ( 0, 0, 1, 1, 0, 1) st in rev St st, work 14 (14, 14, 18, 18, 26, 30) sts in honeycomb st, work 0 ( 0, 0, 1, 1, 0, 1) st in rev St st, work 34 sts of cable pat, work 8 (11, 14, 17, 23, 26, 29) sts in rev St st.
Cont as directed until….

LEFT FRONT
Cast on and work as directed including Beg chart pats, until piece measures 8″/20.5 cm from beg, end with chart row 18.
Cont as directed until….

FINISHING
Right front buttonhole band

With RS facing and …. as for buttonband for 3 rows. Work buttonholes on next row, opposite markers, by binding off 2 sts for each buttonhole.
Cont as directed until….

Pocket bands
Slip 28 sts from pocket holders….
Reattach yarn, and work in twisted rib as foll:
Row 1 (RS) P into front and back of first st, [k1 tbl, p2] 9 times – 29 sts.
Next row (WS) K2, [p1 tbl, k2] 9 times.
Cont as directed until….

COLLAR
With RS facing and …Work in twisted rib as foll:
Row 1 (RS of collar, WS of sweater) K2, *p2, k1tbl; rep from * to last 4 sts, p2, k2.
Cont as directed to end.

Pattern #2, Union Jack Cardigan

Photo on page 73, instructions begin on page 107 
Updated: 08Oct2010

MATERIALS
The weight of the Rowan/Westminster Fibers Scottish Tweed 4-ply was misstated, each ball weighs .88oz/25g.

The yarn amounts are correct.

Pattern #9, Welted Scarf

Photo on page 80, instructions begin on page 113
Updated: 14Mar2012

Page 81 states that 2 yarns were used to make this welted scarf.
The only yarn used is as stated in pattern, Rowan/Westminster Fibers Big Wool.

Pattern #13, Lace Jacket

Photo on pages 84 and 85, instructions begin on page 115
Updated: 20Feb2014

Correction is underlined.

Lace Cuff/Beg chart 4
With RS of sleeve facing and scrap yarn, cast on 22 sts to LH needle for lace cuff.

Pattern #16, Textured Cardi

Photo on pages 88 and 89, instructions begin on page 118
Updated: 23Aug2010

Correction is underlined.

POCKETS
With size 3 (3.25mm) needles and B, cast on 53 sts.

Pattern #17, Flounced Pullover

Photo on pages 90, instructions begin on page 119
Updated: 30Aug2010

1. Correction is underlined.

GAUGE
Gauge swatch is worked using size 5 (3.75mm) needles or size to obtain gauge.

2. Replace entire left sleeve with the following-

LEFT SLEEVE, pg 120

Cast on 72 sts for the armhole edge of sleeve back.
Work rows 1-6 of left sleeve pat.
Next (inc) row (RS) Work Row 7 to marker, sl marker, inc 1 st, cont to end of row – 73 sts.
Work rows 8 – 14.
Next (inc) (RS) Work Row 15 to marker, sl marker, inc 1 st, cont to end of row – 74 sts.
Work row 16. Continue to work left sleeve pat AND inc in this manner EVERY 8th row 14 times more AT SAME TIME :
Beg short rows 1
*Next row (RS)
Work Row 17 to last 4 sts, w&t.
Next row Work Row 18 to end of row.
Next row Work Row 19 to 7 sts before last wrapped st, w&t.
Next row Work Row 20 to end of row.
Rep last 2 rows 5 times more.*
Next row Work row 1 across all sts to end, hiding all wraps- 76 sts.
Work left sleeve pat rows 2 – 16 once more – 77 sts.

Beg short rows 2
**Next row (RS) Work Row 17 to last 8 sts, w&t.
Next row Work Row 18 to end of row.
Next row Work Row 19 to 8 sts before last wrapped st, w&t.
Next row Work Row 20 to end of row.
Rep last 2 rows 5 times more.**
Next row Work row 1 across all sts to end, hiding all wraps – 79 sts.
Work left sleeve pat rows 2 – 16 once more – 81 sts.

Work short rows 2 from ** to ** once more.
Next row Work row 1 across all sts to end, hiding all wraps – 83 sts.
Work left sleeve pat rows 2 – 16 once more – 85 sts.
Work short rows 1 from * to * once more.
Next row Work row 1 across all sts to end, hiding all wraps- 87 sts.
Work left sleeve pat rows 2 – 15 once more – 88 sts.
Knit 1 row, purl 3 rows, knit 1 row. Bind off.

Pattern #20, Smocked Cable Coat

Photo on page 93, instructions begin on page 124
Updated: 04Dec2013

Corrections are underlined.

BACK
Beg chart pat
Dec row (RS)
K1 (selvage st), k2 (2, 2, 2, 5, 7), [k2tog, k3 (4, 5, 6, 9, 10)] 3 times, k2tog, pm; beg chart row 1 working 8-st rep 9 (9, 9, 9, 10, 10) times, then work to end of chart row, pm; [ssk, k3 (4, 5, 6, 9, 10)] 3 times, ssk, k2(2, 2, 2, 5, 7), k1 (selvage st.).
Continue as written.

Shoulder shaping
Bind off rem 44 (43, 43, 45, 52, 52) sts.

LEFT FRONT
Beg chart pat
Row 1 (RS)
K1 (selvage st), k17(20, 23, 26, 30, 35), pm; beg chart row 1 working 8-st rep 2 (2, 2, 2, 3, 3) times, then work to end of chart row, pm; k13 (13, 13, 13, 17, 17).
Continue as written.

SLEEVES
Beg chart pat
Row 1 (RS) K18 (18, 21, 24, 27, 30), pm; beg chart row 1 working 8-st rep twice, then work to end of chart row, pm; k18 (18, 21, 24, 27, 30).
Continue as written.

A corrected chart has been posted. Click here to download [PDF 20K].

Pattern #21, Cabled Vest

Photo on page 94, instructions begin on page 125
Updated: 10Jan2013 

For left front: Change to larger needles before Dec row (RS) K2tog, [p2, k2tog] 3 (4, 5, 6, 7) times work row 12 of chart over 29 sts, k3—42 (45, 48, 51, 54) sts.

For right front: Change to larger needles before Dec row (RS) K3, work row 12 of chart over 29 sts, k2tog, [p2, k2tog] 3 (4, 5, 6, 7) times—42 (45, 48, 51, 54) sts.

Pattern #27, Banded Turtleneck

Photo on page 100, instructions begin on page 131
Updated: 17Feb2011

BACK and FRONT
Cast on and work using smaller, longer circular needle – size 9 (5.5mm), 32″/80cm long.

SLEEVES
When there are too many sleeve sts to fit comfortably on dpns, use smaller, shorter circular needle – size 9 (5.5mm), 16″/40cm long.

COLLAR
Collar sts are picked up using smaller, shorter circular needle – size 9 (5.5mm), 16″/40cm long. Larger circular needle – size 10/6mm – is used for last 4″/10cm of collar.